 | Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |
Use LDP as the signaling protocol to advertise ingress labels to the remote PE routers. When configured, LDP examines the Layer 2 circuit configuration and initiates extended neighbor discovery for all the Layer 2 circuit neighbors (for example, remote PEs). This process is similar to how LDP works when tunneled over Resource Reservation Protocol (RSVP). You must run LDP on the lo0.0 interface for extended neighbor discovery to function correctly.
For detailed information about how to configure LDP, see the JUNOS MPLS Applications Configuration Guide.
| Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |