See the following sections:
- spi spi-value;
- [edit security ipsec security-association sa-name manual direction
- (inbound | outbound | bi-directional)]
Statement introduced before JUNOS Release 7.4.
Configure SPI for an SA.
spi-value—An arbitrary value that uniquely identifies which SA to use at the receiving host (the destination address in the packet).
 |
Note: Use the auxiliary SPI when you configure the protocol statement to use the bundle option. |
See Configuring the Security Parameter Index.
system—To view this statement in the configuration.
system-control—To add this statement to the configuration.
- spi spi-value;
- [edit security ipsec internal security-association manual
direction]
Statement introduced before JUNOS Release 7.4.
The Security Parameter Index (SPI) value used for the internal Routing-Engine-to-Routing-Engine IPSec security association (SA) configuration.
spi-value—Integer to use for this SPI.
See Configuring Internal IPSec for JUNOS-FIPS.
Crypto Officer—To add and view this statement in the configuration.
Secure Configuration Guide for Common Criteria and JUNOS-FIPS
 | Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |