show system processes providers

Syntax

Release Information

Command introduced in JUNOS Release 8.5.

Description

Display information about software processes that are running on the router. The output is similar to that of the show system processes extensive command, but this command displays only provider processes (that is, only external processes). Also, this command output has an extra column labeled PROVIDER to display the provider prefix.

Required Privilege Level

view

List of Sample Output

Output Fields

For a description of the output fields, see the output fields table for the show system processes command in the JUNOS System Basics and Services Command Reference. This table explains all the fields except for PROVIDER which is for the string that is the provider prefix for the SDK application running the process.

Sample Output

last pid:  7014;  load averages:  0.19,  0.09,  0.05  up 0+00:57:29    12:54:45
   54 processes:  1 running, 53 sleeping
   Mem: 101M Active, 105M Inact, 31M Wired, 132M Cache, 69M Buf, 369M Free
   Swap: 1536M Total, 1536M Free
     PID USERNAME PROVIDER PRI NICE   SIZE    RES STATE    TIME   WCPU COMMAND
    7001 root     jnx       96    0  3240K  2700K select   0:00  0.00% jnx-exampled

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.