List of Tables

Table 1: Notice Icons

Table 2: Text and Syntax Conventions

Table 3: Technical Documentation for Supported Routing Platforms

Table 4: JUNOS Software Network Operations Guides

Table 5: JUNOS Software for J-series Services Routers and SRX-series Services Gateways Documentation

Table 6: Additional Books Available Through http://www.juniper.net/books

Table 7: Major Router Hardware Components

Table 8: Methods for Configuring JUNOS Software

Table 9: Special Requirements for Plain-Text Passwords

Table 10: Default System Login Classes

Table 11: Login Class Permission Flags

Table 12: Common Regular Expression Operators to Allow or Deny Operational Mode Commands

Table 13: Configuration Mode Commands—Common Regular Expression Operators

Table 14: Juniper Networks Vendor-Specific RADIUS Attributes

Table 15: Juniper Networks Vendor-Specific TACACS+ Attributes

Table 16: Order of Authentication Attempts

Table 17: Minimum Configuration Statements for System Logging

Table 18: Default System Logging Settings

Table 19: JUNOS System Logging Facilities

Table 20: System Log Message Severity Levels

Table 21: Default Facilities for Messages Directed to a Remote Destination

Table 22: Facilities for the facility-override Statement

Table 23: Facility Codes Reported in Priority Information

Table 24: Numerical Codes for Severity Levels Reported in Priority Information

Table 25: Regular Expression Operators for the match Statement

Table 26: Example: Local and Forwarded Severity Level Are Both info

Table 27: Example: Local Severity Is notice, Forwarded Severity Is critical

Table 28: Example: Local Severity Is critical, Forwarded Severity Is notice

Table 29: Pool and Binding Statements

Table 30: Common Configuration Statements

Table 31: DHCP Processes Tracing Flags

Table 32: System Alarms

Table 33: Juniper Networks Vendor-Specific RADIUS Attributes for L2TP

Table 34: Supported IETF RADIUS Attributes for L2TP

Table 35: Supported RADIUS Accounting Start Attributes for L2TP

Table 36: Supported RADIUS Accounting Stop Attributes for L2TP

Table 37: Supported RADIUS IETF Attributes

Table 38: Supported Juniper Networks VSAs

Table 39: DHCP-Attributes Statements

Table 40: show extension-provider system virtual-memory Output Fields

Table 41: show system processes health Output Fields

Table 42: show system resource-cleanup processes Output Fields

Table 43: show version Output Fields

Table 44: Configurable PIC Alarm Conditions

Table 45: Chassis Components Alarm Conditions on an M5 or M10 Router

Table 46: Chassis Components Alarm Conditions on an M7i or M10i Router

Table 47: Chassis Components Alarm Conditions for an M20 Router

Table 48: Chassis Component Alarm Conditions for an M120 Router

Table 49: Chassis Component Alarm Conditions for an M40 Router

Table 50: Chassis Component Alarm Conditions for an M40e or M160 Router

Table 51: Chassis Component Alarm Conditions for an M320 Router

Table 52: Chassis Component Alarm Conditions for the T320 or T640 Routing Platform

Table 53: Chassis Component Alarm Conditions for an MX240, MX480, or MX960 Router

Table 54: Backup Routing Engine Alarms

Table 55: Ranges for Channelized DS3-to-DS0 Configuration

Table 56: Ranges for Channelized E1 Configuration

Table 57: Maximum Delay Buffer with q-pic-large-buffer Statement Enabled

Table 58: Restricted Software Features in Ethernet Services Mode

Table 59: T640 to Routing Matrix FPC Conversion Chart

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.