[Contents] [Prev] [Next] [Index] [Report an Error]

Configuring the Client

To configure the client, include the client statement at the [edit access profile profile-name] hierarchy level:



[edit access profile profile-name]

client client-name;

client-name is the peer identity.

For L2TP, you can optionally use the wildcard (*) to define a default tunnel client to authenticate multiple LACs with the same secret and L2TP attributes. If an LAC with a specific name is not defined in the configuration, the wildcard tunnel client authenticates it.

This section includes the following topics:

Example: Defining the Default Tunnel Client
Example: Defining the User Group Profile
Configuring the CHAP Secret
Example: Configuring PPP CHAP
Referencing the Group Profile
Configuring L2TP Properties for a Profile
Example: PPP MP for L2TP
Example: L2TP Multilink PPP Support on Shared Interfaces
Configuring the Password Authentication Protocol Password for an L2TP Profile
Example: Configuring PAP for an L2TP Profile
Configuring the PPP Properties for a Profile
Applying a Configured PPP Group Profile to a Tunnel
Example: Applying a User Group Profile on the M7i or M10i Router
Example: Configuring the Profile

[Contents] [Prev] [Next] [Index] [Report an Error]