[Contents] [Prev] [Next] [Index] [Report an Error]

Configuring System Priority

To configure LACP system priority for aggregated Ethernet interfaces on the chassis, use the system-priority statement at the [edit chassis aggregated-devices ethernet lacp] hierarchy level:



[edit chassis aggregated-devices ethernet lacp]

system-priority priority;

The system priority is a 2-octet binary value that is part of the LACP system ID. The LACP system ID consists of the system priority as the two most-significant octets and the interface MAC address as the six least-significant octets. The system with the numerically lower value for system priority has the higher priority. By default, system priority is 127, with a range of 0 to 65535.

[Contents] [Prev] [Next] [Index] [Report an Error]