[Contents] [Prev] [Next] [Index] [Report an Error]

Configuring System Alarms to Appear Automatically

You can configure J-series Services Routers to execute a show system alarms command whenever a user with the login class admin logs on to the router. To do so, include the login-alarms statement at the [edit system login class admin] hierarchy level:



[edit system login class admin]

login-alarms;

Table 32 describes system alarms that may occur. These alarms are preset and cannot be modified.

Table 32: System Alarms

Alarm Type	Alarm Summary	Remedy
Configuration	This alarm appears if you have not created a rescue configuration for the router. If you inadvertently commit a configuration that denies management access to the router, you must either connect a console to the router or invoke a rescue configuration. Using a rescue configuration is the recommended method. A rescue configuration is one that you know allows management access to the router.	Create the rescue configuration. For more information, see the JUNOS CLI User Guide.
License	This alarm appears if you have configured at least one software feature that requires a feature license, but no valid license for the feature is currently installed.	Install a valid license key.

For more information on system alarms for J-series Services Routers, see the J-series Services Router Administration Guide. For more information on the show system alarms command, see the JUNOS System Basics and Services Command Reference.

[Contents] [Prev] [Next] [Index] [Report an Error]