[Contents] [Prev] [Next] [Index] [Report an Error]

Configuring SONET/SDH Framing

By default, SONET/SDH PICs use SONET framing. For a discussion of the differences between the two standards, see the JUNOS Network Interfaces Configuration Guide.

To configure a PIC to use SDH framing, include the framing statement at the [edit chassis fpc slot-number pic pic-number] hierarchy level, specifying the sdh option:



[edit chassis]
user@host# set fpc  slot-number pic  pic-number framing sdh

[edit chassis]
user@host# show


fpc slot-number {



pic pic-number {

framing sdh; 
}


}

On a TX Matrix platform, include the framing statement at the [edit chassis lcc number fpc slot-number pic pic-number] hierarchy level, specifying the sdh option:



[edit chassis lcc number]
user@host# set fpc slot-number pic pic-number framing sdh

[edit chassis lcc number]
user@host# show


fpc slot-number {



pic pic-number {

framing sdh; 
}


}

To explicitly configure a PIC to use SONET framing, include the framing statement at the [edit chassis fpc slot-number pic pic-number] hierarchy level, specifying the sonet option:



[edit chassis]
user@host# set fpc slot-number pic pic-number framing sonet

[edit chassis]
user@host# show


fpc slot-number {



pic pic-number {

framing sonet;
}


}

On a TX Matrix platform, include the framing statement at the [edit chassis lcc number fpc slot-number pic pic-number] hierarchy level, specifying the sonet option:



user@host# set fpc slot-number pic pic-number framing sonet

[edit chassis lcc number]
user@host# show


fpc slot-number {



pic pic-number {

framing sonet;
}


}

For information about configuring a TX Matrix platform, see TX Matrix Platform and T640 Routing Node Configuration Guidelines.

[Contents] [Prev] [Next] [Index] [Report an Error]