See the following sections:
- service-state (in-service | out-of-service-forced | out-of-service-graceful);
- [edit services pgcp gateway gateway-name]
Statement introduced in JUNOS Release 8.5.
Set the service state of the virtual packet gateway (VPG).
in-service—The VPG is operational and available for traffic. When the VPG is in service, it attempts to connect to the packet gateway controller (PGC) and accepts all Packet Gateway Control Protocol (PGCP) commands from the PGC.
out-of-service-forced—Force the VPG out of service. When the VPG is forced out of service, it immediately removes all gates and disconnects from the PGC. The VPG does not attempt to establish a new connection.
out-of-service-graceful—Cause the VPG to go out of service by entering a draining mode and waiting for all terminations to be subtracted before going out of service. During the draining, the packet gateway accepts only subtract commands from the PGC.
See Configuring the Service State of a VPG.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
- service-state (in-service | out-of-service-forced | out-of-service-graceful);
- [edit services pgcp virtual-interface]
Statement introduced in JUNOS Release 9.0.
Set the service state of the virtual interface.
in-service—Virtual interface is operational and available for traffic. When the virtual interface is in service, it is connected to the physical interface and accepts all Voice calls. This is the default.
out-of-service-forced—Forces the virtual interface out of service. When the virtual interface is forced out of service, it immediately removes all calls and disconnects from the physical interface. The virtual interface does not attempt to establish a new connection.
out-of-service-graceful—Causes the virtual interface goes out of service by entering a draining mode and waiting for all terminations to be subtracted before going out of service. During the draining, the virtual interface accepts only subtract commands from the PGC.
See Configuring the Service State of a Virtual Interface.
interface-level—To view this statement in the configuration.
interface-level—To add this statement to the configuration.