[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]

gateway

Syntax

pgcp {
gateway gateway-name {
cleanup-timeout seconds;
gateway-address gateway-address;
gateway-controller gateway-controller-name {
local-controller | remote-controller ;
controller-address ip-address;
controller-port port-number;
interim-ah-scheme {
algorithm algorithm;
}
}
gateway-port gateway-port;
service-state (in-service | out-of-service-forced | out-of-service-graceful);
graceful-restart {
maximum-synchronization-mismatches number-of-mismatches;
maximum-synchronization-time seconds;
}
data-inactivity-detection {
inactivity-delay seconds;
latch-deadlock-delay seconds;
send-notification-on-delay;
inactivity-duration seconds;
stop-detection-on-drop;
report-service-change {
service-change-type (forced-906 | forced-910);
}
}
h248-properties {
application-data-inactivity-detection {
ip-flow-stop-detection (regulated-notify | immediate-notify);
}
base-root {
normal-mg-execution-time default milliseconds;
normal-mgc-execution-time default milliseconds;
mg-provisional-response-timer-value default milliseconds;
mgc-provisional-response-timer-value default milliseconds;
mg-originated-pending-limit default number-of-pendings-received;
mgc-originated-pending-limit default number-of-pendings-received;
}
diffserv {
dscp {
default (dscp-value | alias | do-not-change);
}
}
event-timestamp-notification {
request-timestamp (requested | suppressed | autonomous);
}
hanging-termination-detection {
timerx seconds;
}
notification-behavior {
notification-regulation default (once | 0–100);
}
segmentation {
mg-segmentation-timer default milliseconds;
mgc-segmentation-timer default milliseconds;
mg-maximum-pdu-size default bytes;
mgc-maximum-pdu-size default bytes;
}
traffic-management {
peak-data-rate {
default bytes-per-second;
rtcp {
fixed-value bytes-per-second;
percentage percentage;
}
}
sustained-data-rate {
default bytes-per-second;
rtcp {
fixed-value bytes-per-second;
percentage percentage;
}
}
max-burst-size {
default bytes;
rtcp {
fixed-value bytes;
percentage percentage;
}
}
}
inactivity-timer {
inactivity-timeout {
detect;
maximum-inactivity-time {
default 10-millisecond-units;
}
}
}
}
h248-options {
audit-observed-events-returns-history;
encoding {
no-dscp-bit-mirroring;
}
service-change {
control-association-indications {
disconnect {
controller-failure (failover-909 | restart-902);
reconnect (disconnected-900 | restart-902);
}
down {
administrative (forced-905 | forced-908 | none);
failure (forced-904 | forced-908 | none);
graceful (graceful-905 | none );
}
up {
cancel-graceful (none | restart-918);
failover-cold (failover-920 | restart-901);
failover-warm (failover-919 | restart-902);
}
}
virtual-interface-indications {
virtual-interface-down {
administrative (forced-905 | forced-906 | none);
failure (forced-904 | forced-906 | none);
graceful (graceful-905 | none);
link-loss (forced-906 | none);
}
virtual-interface-up {
cancel-graceful (Virtual Interface) (none | restart-918);
warm (none | restart-900);
}
}
context-indications {
state-loss (forced-910 | forced-915 | none);
}
}
wildcard-response-service-change;
}
h248-timers {
initial-average-ack-delay milliseconds;
maximum-net-propagation-delay milliseconds;
maximum-waiting-delay milliseconds;
tmax-retransmission-delay milliseconds;
}
max-concurrent-calls number-of-calls;
monitor {
media {
rtcp;
rtp;
}
}
service-state (in-service | out-of-service-forced | out-of-service-graceful);
session-mirroring {
delivery-function delivery-function-name {
destination-address destination-address;
destination-port destination-port;
network-operator-id network-operator-id;
source-address source-address;
source-port source-port;
}
disable-session-mirroring;
}
}
}

Hierarchy Level

[edit services pgcp]

Release Information

Statement introduced in JUNOS Release 8.4.

graceful-restart option introduced in JUNOS Release 8.5.

h248-options option introduced in JUNOS Release 8.5.

h248-properties option introduced in JUNOS Release 8.5.

monitor option introduced in JUNOS Release 9.0.

session-mirroring option introduced in JUNOS Release 9.2.

data-inactivity-detection option introduced in JUNOS Release 9.3.

overload-control option introduced in JUNOS Release 9.3.

Description

Configure a VPG on the router.

Options

gateway-name—Identifier of the VPG. You can configure an IP address as the gateway name. However, the IP address is not used in the operation of the VPG.

The remaining statements are explained separately.

Usage Guidelines

See Configuring Virtual Packet Gateways.

Required Privilege Level

interface—To view this statement in the configuration.

interface–control—To add this statement to the configuration.

[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]