[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]

Examples: Configuring Intrachassis LSQ Redundancy

MLPPP Configuration

The following configuration shows that lsq-1/1/0 and lsq-1/3/0 work as a pair and the redundancy type is hot-standby, which sets the requirement for the failure detection and recovery time to be less than 5 seconds:

interfaces rlsq0 {
redundancy-options {
primary lsq-1/1/0;
secondary lsq-1/3/0;
hot-standby; #either hot-standby or warm-standby is supported
}
}

The following example shows a related MLPPP configuration:

Note: MLPPP protocol configuration is required for this configuration.

interfaces {
t1-/1/2/0 {
unit 0 {
family mlppp {
bundle rlsq0.0;
}
}
}
rlsq0 {
unit 0 {
family inet {
address 30.1.1.2/24;
}
}
}
}

The following example shows a related CoS configuration:

class-of-service {
interfaces {
rlsq0 {
unit * {
fragmentation-maps fr-map1;
}
}
}
}

The following example shows a complete link state replication configuration for MLPPP. This example uses two bundles, each with four T1 links. The first four T1 links (t1-*:1 through t1-*:4) form the first bundle and the last four T1 links (t1-*:5 through t1-*:8) form the second bundle. To minimize the duplication in the configuration, this example uses the [edit groups] statement; for more information, see the JUNOS System Basics Configuration Guide. This type of configuration is not required; it simplifies the task and minimizes duplication.

groups {
ml-partition-group {
interfaces {
<coc3-*> {
partition 1 oc-slice 1 interface-type coc1;
}
<coc1-*> {
partition 1-8 interface-type t1;
}
}
}
ml-bundle-group-1 {
interfaces {
<t1-*:"[1-4]"> {
encapsulation ppp;
unit 0 {
family mlppp {
bundle lsq-0/1/0.0;
}
}
}
}
}
ml-bundle-group-2 {
interfaces {
<t1-*:"[5-8]"> {
encapsulation ppp;
unit 0 {
family mlppp {
bundle lsq-0/1/0.1;
}
}
}
}
}
}
interfaces {
lsq-0/1/0 {
unit 0 {
encapsulation multilink-ppp;
family inet {
address 1.1.1.1/32 {
destination 1.1.1.2;
}
}
}
unit 1 {
encapsulation multilink-ppp;
family inet {
address 1.1.2.1/32 {
destination 1.1.2.2;
}
}
}
}
coc3-1/0/0 {
apply-groups ml-partition-group;
sonet-options {
aps {
preserve-interface;
working-circuit aps-group-1;
}
}
}
coc1-1/0/0:1 {
apply-groups ml-partition-group;
}
t1-1/0/0:1:1 {
apply-groups ml-bundle-group-1;
}
t1-1/0/0:1:2 {
apply-groups ml-bundle-group-1;
}
t1-1/0/0:1:3 {
apply-groups ml-bundle-group-1;
}
t1-1/0/0:1:4 {
apply-groups ml-bundle-group-1;
}
t1-1/0/0:1:5 {
apply-groups ml-bundle-group-2;
}
t1-1/0/0:1:6 {
apply-groups ml-bundle-group-2;
}
t1-1/0/0:1:7 {
apply-groups ml-bundle-group-2;
}
t1-1/0/0:1:8 {
apply-groups ml-bundle-group-2;
}
coc3-2/0/0 {
apply-groups ml-partition-group;
sonet-options {
aps {
preserve-interface;
protect-circuit aps-group-1;
}
}
}
coc1-2/0/0:1 {
apply-groups ml-partition-group;
}
t1-2/0/0:1:1 {
apply-groups ml-bundle-group-1;
}
t1-2/0/0:1:2 {
apply-groups ml-bundle-group-1;
}
t1-2/0/0:1:3 {
apply-groups ml-bundle-group-1;
}
t1-2/0/0:1:4 {
apply-groups ml-bundle-group-1;
}
t1-2/0/0:1:5 {
apply-groups ml-bundle-group-2;
}
t1-2/0/0:1:6 {
apply-groups ml-bundle-group-2;
}
t1-2/0/0:1:7 {
apply-groups ml-bundle-group-2;
}
t1-2/0/0:1:8 {
apply-groups ml-bundle-group-2;
}
}

FRF-15 Configuration

The following example shows a configuration for an FRF.15 bundle:

interfaces rlsq0 {
redundancy-options {
primary lsq-1/2/0;
secondary lsq-1/3/0;
warm-standby;
}
unit 0 {
encapsulation multilink-frame-relay-end-to-end;
family inet {
address 30.1.1.1/24;
}
}
}

FRF-16 Configuration

The following example shows a configuration for an FRF.16 bundle:

interfaces rlsq0:0 {
dce;
encapsulation multilink-frame-relay-uni-nni;
redundancy-options {
primary lsq-1/2/0:0;
secondary lsq-1/3/0:0;
warm-standby;
}
unit 0 {
dlci 1000;
family inet {
address 50.1.1.1/24;
}
}
}
[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]