See the following sections:
- encapsulation (atm-mlppp-llc | multilink-frame-relay-end-to-end
| multilink-ppp | ... );
- [edit interfaces interface-name unit logical-unit-number],
- [edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number]
Statement introduced before JUNOS Release 7.4.
Logical link-layer encapsulation type.
atm-mlppp-llc—For ATM 2 interfaces, use Multilink Point-to-Point Protocol (MLPPP) over ATM Adaptation Layer 5 (AAL5) logical link control (LLC) encapsulation, as described in RFC 2364, PPP over AAL5.
multilink-frame-relay-end-to-end—Use Multilink Frame Relay (MLFR) FRF.15 encapsulation. This encapsulation is used only on multilink and link services interfaces and their constituent T1 or E1 interfaces.
multilink-ppp—Use MLPPP encapsulation. This encapsulation is used only on multilink and link services interfaces and their constituent T1 or E1 interfaces.
See Configuring Logical Interface Encapsulation; for information about encapsulation statement options used with other interface types, see the JUNOS Network Interfaces Configuration Guide.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
- encapsulation (multilink-frame-relay-uni-nni | ... );
- [edit interfaces interface-name]
Statement introduced before JUNOS Release 7.4.
Physical link-layer encapsulation type.
MLFR UNI NNI encapsulation (on link services interfaces).
multilink-frame-relay-uni-nni—Use MLFR UNI NNI encapsulation. This encapsulation is used only on link services interfaces functioning as FRF.16 bundles and their constituent T1 or E1 interfaces.
See Configuring the Link Services Physical Interface Encapsulation; for information about encapsulation statement options used with other interface types, see the JUNOS Network Interfaces Configuration Guide.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.