[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]

[edit interfaces] Hierarchy Level

To configure services interfaces, include the following statements at the [edit interfaces] hierarchy level of the configuration. The statements can also be configured at the [edit logical-systems logical-system-name interfaces] hierarchy level.

Note: For the complete [edit interfaces] hierarchy, see the JUNOS Network Interfaces Configuration Guide. This listing includes only the statements used in configuring services.

interface-name {
(atm-options | fastether-options | gigether-options | sonet-options) {
mpls {
pop-all-labels {
required-depth number;
}
}
}
encapsulation type;
lsq-failure-options {
no-termination-request;
[ trigger-link-failure interface-name ];
}
mlfr-uni-nni-bundle-options {
acknowledge-retries number;
acknowledge-timer milliseconds;
action-red-differential-delay (disable-tx | remove-link);
drop-timeout milliseconds;
fragment-threshold bytes;
cisco-interoperability send-lip-remove-link-for-link-reject;
hello-timer milliseconds;
lmi-type (ansi | itu);
minimum-links number;
mrru bytes;
n391 number;
n392 number;
n393 number;
red-differential-delay milliseconds;
t391 number;
t392 number;
yellow-differential-delay milliseconds;
encapsulation type;
}
passive-monitor-mode;
unit logical-unit-number {
clear-dont-fragment-bit;
compression {
rtp {
maximum-contexts number <force>;
f-max-period number;
queues [ queue-numbers ];
port {
minimum port-number;
maximum port-number;
}
}
}
compression-device interface-name;
copy-tos-to-outer-ip-header;
disable-mlppp-inner-ppp-pfc;
dlci dlci-identifier;
drop-timeout milliseconds;
dial-options {
ipsec-interface-id name;
l2tp-interface-id name;
(dedicated | shared);
}
dynamic-call-admission-control {
activation-priority priority;
bearer-bandwidth-limit kilobits-per-second;
}
encapsulation type;
family family {
accounting {
destination-class-usage;
source-class-usage direction;
}
address address {
destination address;
}
bundle (ml-fpc/pic/port | ls-fpc/pic/port);
ipsec-sa ipsec-sa;
multicast-only;
receive-options-packets;
receive-ttl-exceeded;
sampling direction;
service {
input {
[ service-set service-set-names <service-filter filter-name> ];
post-service-filter filter-name;
}
output {
[ service-set service-set-names <service-filter filter-name> ];
}
}
}
fragment-threshold bytes;
interleave-fragments {
queues [ queue-numbers ];
}
minimum-links number;
mrru bytes;
multicast-dlci dlci-identifier;
peer-unit unit-number;
reassemble-packets;
rpm client;
service-domain (inside | outside);
short-sequence;
tunnel {
allow-fragmentation;
backup-destination address;
destination destination-address;
do-not-fragment;
key number;
routing-instance {
destination routing-instance-name;
}
source-address address;
ttl number;
}
twamp-server;
}
multiservice-options {
(core-dump | no-core-dump);
(syslog | no-syslog);
}
services-options {
inactivity-timeout seconds;
open-timeout seconds;
syslog {
host hostname {
services severity-level;
facility-override facility-name;
log-prefix prefix-value;
}
}
}
}
rlsqnumber {
redundancy-options {
hot-standby | warm-standby;
primary lsq-fpc/pic/port;
secondary lsq-fpc/pic/port;
}
}
rspnumber {
redundancy-options {
primary sp-fpc/pic/port;
secondary sp-fpc/pic/port;
}
}
so-fpc/pic/port {
unit logical-unit-number {
passive-monitor-mode;
}
}
[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]