[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]

destination-interface

Syntax



destination-interface interface-name;

Hierarchy Level



[edit services rpm probe owner test test-name],
[edit services rpm probe-server (tcp | udp)]

Release Information

Statement introduced in JUNOS Release 7.5.

Description

On J-series Services Routers only, specify the output (lt-) interface used to send packets to the forwarding plane. This interface must support looping of packets to an input interface without adding any encapsulation.

On M-series and T-series routing platforms, specify a services (sp-) interface that adds a timestamp to RPM probe messages. This feature is supported only with icmp-ping, icmp-ping-timestamp, udp-ping, and udp-ping-timestamp probe types. You must also configure the rpm statement on the sp- interface and include the unit 0 family inet statement with a /32 address.

Options

interface-name—Name of the output interface (J-series Services Routers) or adaptive services interface (M-series and T-series routers).

Usage Guidelines

See Configuring the Probe, Configuring the Server, or Configuring RPM Timestamping.

Required Privilege Level

system—To view this statement in the configuration.

interface-control—To add this statement to the configuration.