[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]

Configuring the Control Source

You configure information about the control source, including allowed source addresses and destinations and authentication key values. To configure the control source information, include the control-source statement at the [edit services dynamic-flow-capture capture-group client-name] hierarchy level:




control-source identifier {

allowed-destinations [ destination-identifier ];

minimum-priority value;

no-syslog;

notification-targets [ address address port port-number ];

service-port port-number;

shared-key value;

source-addresses [ address ];
}

Assign the control-source statement a unique identifier. You can also include values for the following statements:

allowed-destinations—One or more content destination identifiers to which this control source can request that matched data be sent in its control protocol requests. If you do not specify any content destinations, all available destinations are allowed.
minimum-priority—Value assigned to the control source that is added to the priority of the criteria in the DTCP ADD request to determine the total priority for the criteria. The lower the value, the higher the priority. By default, minimum-priority has a value of 0 and the allowed range is 0 through 254.
notification-targets—One or more destinations to which the DFC PIC interface can log information about control protocol-related events and other events such as PIC bootup messages. You configure each notification-target entry with an IP address value and a User Datagram Protocol (UDP) port number.
service-port—UDP port number to which the control protocol requests are directed. Control protocol requests that are not directed to this port are discarded by DFC PIC interfaces.
shared-key—20-byte authentication key value shared between the control source and the DFC PIC monitoring platform.
source-addresses—One or more allowed IP addresses from which the control source can send control protocol requests to the DFC PIC monitoring platform. These are /32 addresses.

[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]