See the following sections:
- administrative (forced-905 | forced-908 | none);
- [edit services pgcp gateway gateway-name h248-options service-change control-association-indications down]
Statement introduced in JUNOS Release 9.3.
Specify the method and reason that the VPG includes in Unregistration Messages in ServiceChange commands that it sends to the PGC when a control association transitions to Out-of-Service because of an administrative operation.
If you do not specify an option, the VPG includes FO/905 (forced-905).
forced-905—Termination is being taken out of service. The VPG is transitioning to Out-of-Service because of an administrative operation.
forced-908—Termination is being taken out of service. The VPG is transitioning to Out-of-Service because of an administrative operation or error.
none—The VPG does not send a ServiceChange command to the PGC.
See Configuring ServiceChange Method and Reason.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
JUNOS Multiplay Solutions Guide
- administrative (forced-905 | forced-906 | none);
- [edit services pgcp gateway gateway-name h248-options service-change virtual-interface-indications virtual-interface-down]
Statement introduced in JUNOS Release 9.3.
Specify the method and reason that the VPG includes in Service-Interruption ServiceChange commands that it sends to the PGC when a virtual interface changes to Out-of-Service because of an administrative operation.
If you do not specify an option, the VPG includes FO/905 (forced-905).
forced-905—Termination is being taken out of service. The virtual interface is transitioning to Out-of-Service because of an administrative operation.
forced-906—Loss of lower-layer connectivity. The virtual interface is transitioning to Out-of-Service because of a loss of layer 2 connectivity caused by the logical or physical interface being administratively disabled.
none—VPG does not send a ServiceChange command.
See Configuring ServiceChange Method and Reason.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
JUNOS Multiplay Solutions Guide