Configuring Other Protocol-Independent Routing Properties

This chapter discusses how to perform the following tasks for configuring other protocol-independent routing properties:

• Configuring the AS Number
• Configuring the Router Identifier
• Configuring AS Confederation Members
• Configuring Route Recording for Flow Aggregation
• Creating Routing Table Groups
• Configuring How Interface Routes Are Imported into Routing Tables
• Configuring Multicast Scoping
• Enabling Multicast on an Interface
• Configuring Additional Source-Specific Multicast Groups
• Configuring Multicast Forwarding Cache Limits
• Configuring Per-Packet Load Balancing
• Configuring Unicast Reverse-Path-Forwarding Check
• Configuring Graceful Restart
• Configuring a Route Distinguisher
• Configuring a Dynamic Tunnel
• Configuring Logging for the Routing Protocol Process
• Configuring Route Resolution
• Enabling an Indirect Next Hop
• Enabling Nonstop Routing
• Tracing Global Routing Protocol Operations
• Disabling Distributed Periodic Packet Management on the Packet Forwarding Engine
• Enabling Source Routing
• Configuring a Timer to Delay Multiple Exit Discriminator IGP Updates

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.