[Contents] [Prev] [Next] [Index] [Report an Error]

Configuring Multiple Instances of RIP

RIP instances are supported only for VRF instance types. You can configure multiple instances of RIP for VPN support only. You can use RIP in the customer edge-provider edge (CE-PE) environment to learn routes from the CE router and to propagate the PE router’s instance routes in the CE router.

RIP routes learned from neighbors configured under any instance hierarchy are added to the instance’s routing table, instance-name.inet.0.

RIP does not support routing table groups; therefore, it cannot import routes into multiple tables as the OSPF or OSPFv3 protocol does.

To configure multiple instances of RIP, include the following statements:



routing-instances {



routing-instance-name {

interface interface-name;

instance-type vrf;


protocols {


rip {
interface interface-name;
neighbor ip-address;
}


}


}


}

You can include the statements at the following hierarchy levels:

[edit routing-instances routing-instance-name protocols]
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols]

[Contents] [Prev] [Next] [Index] [Report an Error]