Policer Configuration

[Contents] [Prev] [Next] [Index] [Report an Error]

To configure policers, you include statements at the [edit firewall] hierarchy level of the configuration:



[edit firewall]

policer policer-name {

filter-specific;



if-exceeding {
bandwidth-limit bps;
bandwidth-percent number;
burst-size-limit bytes;
}



logical-bandwidth-policer;

logical-interface-policer;


then {

policer-action;
}


}

interface-set interface-set-name {
[ interface-names ];
}

family family-name {



filter filter-name {

accounting-profile name;

interface-specific;
}





prefix-action name {
count;
destination-prefix-length prefix-length;
policer policer-name;
source-prefix-length prefix-length;
subnet-prefix-length prefix-length;
}


}

load-balance-group group-name {
next-hop-group [ group-names ];
}

three-color-policer (Configuring) name {


action {
loss-priority high then discard;
}



logical-interface-policer;


single-rate {
(color-aware | color-blind);
committed-information-rate bps;
committed-burst-size bytes;
excess-burst-size bytes;
}




two-rate {
(color-aware | color-blind);
committed-information-rate bps;
committed-burst-size bytes;
peak-information-rate bps;
peak-burst-size bytes;
}


}

The following sections describe the tasks required for configuring policers and provide configuration examples:

[Contents] [Prev] [Next] [Index] [Report an Error]