[Contents] [Prev] [Next] [Index] [Report an Error]

Examples: Configuring Route Lists

The examples in this section show only fragments of routing policies. Normally, you would combine these fragments with other terms or routing policies.

In all examples, remember that the following actions apply to nonmatching routes:

Evaluate next term, if present.
Evaluate next policy, if present.
Take the accept or reject action specified by the default policy. For more information about the default routing policies, see Default Routing Policies and Actions.

The following examples show how to configure route lists for various purposes:

Example: Rejecting Routes with Specific Destination Prefixes and Mask Lengths
Example: Rejecting Routes with a Mask Length Greater than Eight
Example: Rejecting Routes with Mask Length Between 26 and 29
Example: Rejecting Routes from Specific Hosts
Example: Accepting Routes with a Defined Set of Prefixes
Example: Rejecting Routes with a Defined Set of Prefixes
Example: Rejecting Routes with Prefixes Longer than 24 Bits
Example: Rejecting PIM Multicast Traffic Joins
Example: Rejecting PIM Traffic

[Contents] [Prev] [Next] [Index] [Report an Error]