[Contents] [Prev] [Next] [Index] [Report an Error]

vlan-tags

Syntax

vlan-tags inner tpid.vlan-id inner-range vid1–vid2 outer tpid.vlan-id;

Hierarchy Level

[edit interfaces interface-name unit logical-unit-number],
[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number]

Release Information

Statement introduced before JUNOS Release 7.4.

Description

For Gigabit Ethernet IQ and IQE interfaces only, binds TPIDs and 802.1Q VLAN tag IDs to a logical interface. You must include the stacked-vlan-tagging statement at the [edit interfaces interface-name] hierarchy level.

Note: The inner-range vid1–vid2 option is supported on MX-series with IQE PICs only.

Options

inner tpid.vlan-id—A TPID and a valid VLAN identifier.

Range: For VLAN ID, 1 through 4094. VLAN ID 0 is reserved for tagging the priority of frames.

inner-range vid1–vid2—For MX-series routers with Enhanced IQ (IQE) PICs only; specify a range of VLAN IDs where vid1 is the start of the range and vid2 is the end of the range.

Range: For VLAN ID, 1 through 4094. VLAN ID 0 is reserved for tagging the priority of frames.

outer tpid.vlan-id—A TPID and a valid VLAN identifier.

Range: For VLAN ID, 1 through 511 for normal interfaces, and 512 through 4094 for VLAN CCC interfaces. VLAN ID 0 is reserved for tagging the priority of frames.

Usage Guidelines

See Configuring Dual VLAN Tags.

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.

Related Topics

stacked-vlan-tagging

[Contents] [Prev] [Next] [Index] [Report an Error]

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.