[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
Physical Interface Configuration Statements for Serial Interfaces
To configure serial physical interface properties, include the serial-options statement for the J-series
routing platform at the [edit interfaces se-pim/0/port ] hierarchy level or at the [edit interfaces se- fpc/pic/port] hierarchy level for M-series and
T-series routing platforms:
- [edit interfaces se-fpc/pic/port]
-
serial-options {
-
clock-rate rate;
-
clocking-mode (dce
| internal | loop);
-
control-polarity (negative | positive);
-
cts-polarity (negative
| positive);
-
dcd-polarity (negative
| positive);
-
-
dce-options {
-
control-signal (assert
| de-assert | normal);
-
cts (ignore | normal
| require);
-
dcd (ignore | normal
| require);
-
dsr (ignore | normal
| require);
-
dtr signal-handling-option;
-
ignore-all;
-
indication (ignore
| normal | require);
-
rts (assert | de-assert
| normal);
-
tm (ignore | normal
| require);
- }
-
dsr-polarity (negative
| positive);
-
-
dte-options {
-
control-signal (assert
| de-assert | normal);
-
cts (ignore | normal
| require);
-
dcd (ignore | normal
| require);
-
dsr (ignore | normal
| require);
-
dtr signal-handling-option;
-
ignore-all;
-
indication (ignore
| normal | require);
-
rts (assert | de-assert
| normal);
-
tm (ignore | normal
| require);
- }
-
dtr-circuit (negative
| positive);
-
dtr-polarity (negative
| positive);
-
encoding (nrz |
nrzi);
-
idle-cycle-flag flag;
-
indication-polarity (negative | positive);
-
line-protocol protocol;
-
loopback mode;
-
rts-polarity (negative
| positive);
-
tm-polarity (negative
| positive);
-
transmit-clock invert;
- }
[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
