[Contents] [Prev] [Next] [Index] [Report an Error]

passive

See the following sections:

passive (CHAP)

Syntax

passive;

Hierarchy Level

[edit interfaces interface-name ppp-options chap],
[edit interfaces interface-name unit logical-unit-number ppp-options chap],
[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number ppp-options chap]

Release Information

Statement introduced before JUNOS Release 7.4.

Description

Do not challenge the peer, but respond if challenged. If you omit this statement from the configuration, the interface always challenges its peer.

For ATM2 IQ interfaces only, you can configure CHAP on the logical interface unit if the logical interface is configured with one of the following PPP over ATM encapsulation types:

Usage Guidelines

See Configuring the PPP Challenge Handshake Authentication Protocol.

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.

Related Topics

JUNOS System Basics Configuration Guide

passive (PAP)

Syntax

passive;

Hierarchy Level

[edit interfaces interface-name ppp-options pap],
[edit interfaces interface-name unit logical-unit-number ppp-options pap],
[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number ppp-options pap]

Release Information

Statement introduced in JUNOS Release 8.3.

Description

Do not challenge the peer, but respond if challenged. If you omit this statement from the configuration, the interface always challenges its peer.

Usage Guidelines

See Configuring the PPP Password Authentication Protocol.

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.

Related Topics

JUNOS System Basics Configuration Guide

[Contents] [Prev] [Next] [Index] [Report an Error]

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.