partition

Syntax

Hierarchy Level

Release Information

Statement introduced before JUNOS Release 7.4.

Description

For IQ interfaces and J-series interfaces on the Dual-Port Channelized E1 and T1PIM, configure the channelized interface partition. The partition number is correlated with the channel number. Partition and channel numbering on IQ interfaces begins with :1, not :0.

Default

If you omit this statement, the channelized PIC or PIM is not partitioned, and no data channels are configured.

Options

partition-number—Sublevel interface partition index.

Ranges:

• 1 through 4 for an OC3 interface on a channelized OC12 IQ interface.
• 1 through 12 for a T3 interface on a channelized OC12 IQ interface.
• 1 through 4 for a a T3 interface on a channelized T3 IQ interface.
• 1 through 28 for a T1 IQ interface on a channelized OC12 IQ or channelized T3 IQ interface.
• 1 through 10 for an E1 interface on a channelized E1 IQ interface.
• 1 through 30 on a channelized E1 interface.
• 1 through 23 on a channelized T1 interface.
• 1 through 24 for NxDS0 interfaces on either channelized OC12 IQ or channelized DS3 IQ interfaces.
• 0 through 31(with 0 reserved for framing) for NxDS0 interfaces on channelized E1 IQ interfaces.

The remaining statements are explained separately.

Usage Guidelines

See Configuring Channelized E1 Interfaces, Configuring Channelized OC12/STM4 IQ and IQE Interfaces, and Configuring Channelized T3 Interfaces.

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.

Related Topics

 no-partition

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.