otn-options

Syntax

Hierarchy Level

Release Information

Statement introduced in JUNOS Release 9.4.

Description

Specify the Gigabit Ethernet Optical Transport Network (OTN) interface and the Xenpac interface OTN options.

Options

apply-groups—Groups from which to inherit configuration data.

apply-groups-except—Don't inherit configuration data from these groups.

fec—Enable Forward Error Correction (FEC) mode.

laser-enable—Enable laser.

line-loopback—Enable line loopback.

no-laser-enable—Don't enable laser.

no-line-loopback—Don't enable line loopback.

rate (options)—OTN mode, select from the following options:

• fixed-stuff-bytes—Fixed Stuff Bytes 11.0957Gbps
• no-fixed-stuff-bytes—No Fixed Stuff Bytes 11.0491Gbps
• pass-through—Enable OTN passthrough mode.
• no-pass-through—Do not enable OTN passthrough mode.

trigger—Defect triggers, specify from the following possible completions:

• oc-lof—OC Loss of Frame defect trigger.
• oc-lom—OC Loss of Multiframe defect trigger.
• oc-los—OC Loss of Signal defect trigger.
• oc-wavelength-lock—OC Wavelength Lock defect trigger.
• odu-ais—ODU Alarm Indication Signal defect trigger.
• odu-bbe-th—ODU Background Block Error Threshold defect trigger.
• odu-bdi—ODU Backward Defect Indication defect trigger.
• odu-es-th—ODU Errored Seconds Threshold defect trigger.
• odu-lck—ODU Locked defect trigger.
• odu-oci—ODU Open Connection Indication defect trigger.
• odu-sd—ODU Signal Degrade defect trigger.
• odu-ses-th—ODU Severely Errored Seconds Threshold defect trigger.
• odu-ttim—ODU Trail Trace Identifier Mismatch defect trigger.
• odu-uas-th—ODU Unavailable Seconds Threshold defect trigger.
• opu-ptm—OPU Payload Type Mismatch defect trigger.
• otu-ais—OTU Alarm Indication Signal defect trigger.
• otu-bbe-th—OTU Background Block Error Threshold defect trigger.
• otu-bdi—OTU Backward Defect Indication defect trigger.
• otu-es-th—OTU Errored Seconds Threshold defect trigger.
• otu-fec-deg—OTU FEC Degrade defect trigger.
• otu-fec-exe—OTU FEC Excessive Error defect trigger.
• otu-iae—OTU Incoming Alignment defect trigger.
• otu-sd—OTU Signal Degrade defect trigger.
• otu-ses-th—OTU Severely Errored Seconds Threshold defect trigger.
• otu-ttim—OTU Trail Trace Identifier Mismatch defect trigger.
• otu-uas-th—OTU Unavailable Seconds Threshold defect trigger.

tti—Trace identifier, select from the following options:

• odu-dapi—ODU Destination Access Point Identifier.
• odu-expected-receive-dapi—ODU Expected Receive Destination Access Point Identifier.
• odu-expected-receive-sapi—ODU Expected Receive Source Access Point Identifier.
• odu-sapi—ODU Source Access Point Identifier.
• otu-dapi—OTU Destination Access Point Identifier.
• otu-expected-receive-dapi—OTU Expected Receive Destination Access Point Identifier.
• otu-expected-receive-sapi—OTU Expected Receive Source Access Point Identifier.
• otu-sapi—OTU Source Access Point Identifier.

Usage Guidelines

See Configuring Gigabit Ethernet OTN Options.

Required Privilege Level

interfaces—To view this statement in the configuration.

interfaces-control—To add this statement to the configuration.

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.