[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
operating-mode
Syntax
- operating-mode mode;
Hierarchy Level
- [edit interfaces at-fpc/pic/port dsl-options]
Release Information
Statement introduced before JUNOS Release
7.4.
Description
For J-series Services Routers only, modify the
operating mode of the digital subscriber line for an ATM interface.
Options
-
mode—Operating
mode for ATM-over-ADSL interfaces. The mode can be one of the following:
-
adsl2plus—Set the ADSL line to train in
the ITU G.992.5 mode.
-
ansi-dmt—Set the ADSL line to train in
the ANSI T1.413 Issue 2 mode.
-
auto—Set the ADSL line to autonegotiate
the setting to match the setting of the DSL access multiplexer (DSLAM)
located at the central office. The ADSL line trains in the ANSI T1.413
Issue 2 (ansi-dmt) or ITU G.992.1 (itu-dmt) mode.
-
etsi—Set the ADSL line to train in the
ETSI TS 101 388 V1.3.1 mode.
-
itu-annexb-ur2—Set the ADSL line to train
in the ITU G.992.1 UR-2 mode.
-
itu-annexb-non-ur2—Set the ADSL line to
train in the ITU G.992.1 non-UR-2 mode.
-
itu-dmt—Set the ADSL line to train in the
ITU G.992.1 mode.
-
itu-dmt-bis—Set the ADSL line to train
in the ITU G.992.3 mode.
-
Default: auto
Usage Guidelines
See Configuring ATM-over-ADSL Interfaces.
Required Privilege Level
interface—To view this statement in the
configuration.
interface-control—To add this statement to the configuration.
Related Topics
J-series Services Router Basic LAN and WAN Access Configuration Guide
[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
