[Contents] [Prev] [Next] [Index] [Report an Error]

Normal Situation

RPL Owner Node

If ring has no failure, the show command will have the following output for node 1:

user@node1> show protection-group ethernet-ring aps 
Ethernet Ring Name  Request/state  No Flush  Ring Protection Link Blocked  
pg101               NR             No        Yes                        

Originator  Remote Node ID
Yes         

user@node1> show protection-group ethernet-ring interface 

Ethernet ring port parameters for protection group pg101

Interface    Control Channel  Forward State  Ring Protection Link End  
ge-1/0/1     ge-1/0/1.1       discarding     Yes                      
ge-1/2/4     ge-1/2/4.1       forwarding     No                      

Signal Failure  Admin State
Clear          IFF ready
Clear          IFF ready

user@node1> show protection-group ethernet-ring node-state   
Ethernet ring    APS State    Event         Ring Protection Link Owner 
pg101            idle         NR-RB         Yes                         

Restore Timer  Quard Timer  Operation state
disabled       disabled    operational  

user@node1> show protection-group ethernet-ring statistics group-name pg101 

Ethernet Ring statistics for PG pg101
RAPS sent                        : 1
RAPS received                    : 0
Local SF happened:               : 0
Remote SF happened:              : 0
NR event happened:               : 0
NR-RB event happened:            : 1

Other Nodes

For Node 2 and Node 3, the outputs should be same:

user@node2> show protection-group ethernet-ring aps 
Ethernet Ring Name  Request/state  No Flush  Ring Protection Link Blocked
pg102               NR             No        Yes                        

Originator  Remote Node ID
No          00:01:01:00:00:01 

user@node2> show protection-group ethernet-ring interface 

Ethernet ring port parameters for protection group pg102

Interface    Control Channel  Forward State  Ring Protection Link End 
ge-1/2/1     ge-1/2/1.1       forwarding     No                       
ge-1/0/2     ge-1/0/2.1       forwarding     No                       

Signal Failure  Admin State
Clear          IFF ready
Clear          IFF ready

user@node2> show protection-group ethernet-ring node-state   
Ethernet ring    APS State    Event         Ring Protection Link Owner 
pg102            idle         NR-RB         No                        

Restore Timer  Quard Timer  Operation state
disabled       disabled    operational  

user@node2> show protection-group ethernet-ring statistics group-name pg102 

Ethernet Ring statistics for PG pg101
RAPS sent                        : 0
RAPS received                    : 1
Local SF happened:               : 0
Remote SF happened:              : 0
NR event happened:               : 0
NR-RB event happened:            : 1

[Contents] [Prev] [Next] [Index] [Report an Error]