Disabling a Logical Interface

[Contents] [Prev] [Next] [Index] [Report an Error]

You can unconfigure a logical interface, effectively disabling that interface, without removing the logical interface configuration statements from the configuration. When an interface is disabled, a route (pointing to the reject target) with the IP address of the interface and a 32–bit subnet mask is installed in the routing table. To do this, include the disable statement:




disable;

You can include this statement at the following hierarchy levels:

[edit interfaces interface-name unit logical-unit-number]
[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number]

[Contents] [Prev] [Next] [Index] [Report an Error]