Configuring the Maintenance End Point Interface

[Contents] [Prev] [Next] [Index] [Report an Error]

You must specify the interface to which the MEP is attached. It can be a physical interface, logical interface or trunk interface.

On MX-series routers, you can enable the MEP on a specific VLAN of a trunk interface.

To configure the interface, include the interface statement at the [edit protocols oam ethernet connectivity-fault-management maintenance-domain domain-name maintenance-association ma-name mep mep-id] hierarchy level.

MEP Interface Configuration

This example shows the MEP interface configuration statements:



[edit protocols oam ethernet connectivity-fault-management
maintenance-domain domain-name maintenance-association ma-name]
mep mep-id {
direction (up | down);
interface (ge | xe) (fpc/pic/port | fpc/pic/port.domain | fpc/pic/port.domain vlan vlan-id);
auto-discovery;

priority number;
}

[Contents] [Prev] [Next] [Index] [Report an Error]