Configuring the ATM-over-ADSL Physical Interface Operating Mode

[Contents] [Prev] [Next] [Index] [Report an Error]

Configure the ADSL operating mode on the physical ATM interface by including the operating-mode statement at the [edit interfaces at-pim/0/port dsl-options] hierarchy level:



[edit interfaces at-pim/0/port dsl-options]

operating-mode mode;

By default, the mode is auto, which means the ADSL line autonegotiates the setting to match the setting of the DSLAM located at the central office.

Table 33 shows the Annex A PIM and Annex B PIM operational modes for ATM-over-ADSL interfaces.

Table 33: ATM-over-ADSL Operational Modes

Encapsulation Types	Comments
Annex A PIMs
adsl2plus	Set the ADSL line to train in the ITU G.992.5 mode.
ansi-dmt	Set the ADSL line to train in the ANSI T1.413 Issue 2 mode.
auto	Set the ADSL line to autonegotiate the setting to match the setting of the DSLAM located at the central office. The ADSL line trains in the ANSI T1.413 Issue 2 (ansi-dmt) or ITU G.992.1 (itu-dmt) mode.
itu-dmt	Set the ADSL line to train in the ITU G.992.1 mode.
itu-dmt-bis	Set the ADSL line to train in the ITU G.992.3 mode.
itu-lite	Set the ADSL line to train in the G.992.2 mode.
itu-lite-bis	Set the ADSL line to train in the G.992.4 mode.
Annex B PIMs
adsl2plus	Set the ADSL line to train in the ITU G.992.5 mode.
auto	Set the ADSL line after autonegotiating the setting to match the setting of the DSLAM located at the central office.
etsi	Set the ADSL line to train in the ETSI TS 101 388 V1.3.1 mode.
itu-dmt	Set the ADSL line to train in the ITU G.992.1 mode.
itu-dmt-bis	Set the ADSL line to train in the ITU G.992.3 mode.
itu-annexb-ur2	Set the ADSL line to train in the ITU G.992.1 Deutsche Telekom UR-2 mode.
itu-annexb-non-ur2	Set the ADSL line to train in the ITU G.992.1 non-UR-2 mode.
itu-dmt	Set the ADSL line to train in the ITU G.992.1 mode.

[Contents] [Prev] [Next] [Index] [Report an Error]