Configuring ISDN Services Physical and Logical Interface Properties

[Contents] [Prev] [Next] [Index] [Report an Error]

To configure ISDN services physical interface properties, include the isdn-options statement at the [edit interfaces br-pim/0/port] hierarchy level:



[edit interfaces br-pim/0/port]
isdn-options {

calling-number number;

incoming-called-number number <reject>;

pool pool-name <priority priority>;

spid1 spid-string;

spid2 spid-string;

static-tei-val value;

switch-type (att5e
| etsi | ni1 | ntdms100 | ntt);

t310 seconds;

tei-option (first-call
| power-up);
}

dialer-options {

pool pool-name <priority priority>;
}

To configure ISDN services logical interface properties, include the following statements:



[edit interfaces dln unit logical-unit-number]

dialer-options {

activation-delay seconds;

callback;

callback-wait-period time;

deactivation-delay seconds;

dial-string dial-string-numbers;

idle-timeout seconds;



incoming-map {

caller (caller-id| accept-all);



initial-route-check seconds;

load-interval seconds;

load-threshold percent;

pool pool-name;

redial-delay time;



watch-list {
[ routes ];
}


}


encapsulation [
(cisco-hdlc | multilink-ppp | ppp);
}


}

To configure a primary interface to use an ISDN logical interface as a backup or “failover” interface when the primary connection experiences interruptions in Internet connectivity, include the backup-options statement to specify the ISDN interface at the [edit interfaces interface-name unit logical-unit-number] hierarchy level:



[edit interfaces interface-name unit logical-unit-number]

backup-options {
interface dln.0;
}

You can include these statements at the following hierarchy levels:

[edit interfaces]
[edit logical-systems logical-system-name interfaces]

To configure the Services Router to reject incoming ISDN calls (supported when dial-in is configured), include the reject-incoming statement at the [edit system processes isdn-signaling] hierarchy level:



[edit system processes isdn-signaling]
reject-incoming;
}

To disable ISDN, include the disable statement at the [edit system processes isdn-signaling] hierarchy level:



[edit system processes isdn-signaling]
disable;
}

To disable the dial-out on demand process, include the disable statement at the [edit system processes dialer-services] hierarchy level:



[edit system processes dialer-services]
disable;
}

[Contents] [Prev] [Next] [Index] [Report an Error]