 | Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |
For Gigabit Ethernet IQ interfaces, aggregated Ethernet with Gigabit Ethernet IQ interfaces, Gigabit Ethernet PICs with SFPs (except the 10-port Gigabit Ethernet PIC and the built-in Gigabit Ethernet port on the M7i platform), and MX-series router Gigabit Ethernet, Tri-Rate Ethernet copper, and 10-Gigabit Ethernet interfaces, you can configure frames with particular TPIDs to be processed as tagged frames. To do this, you specify up to eight IEEE 802.1Q TPID values per port; a frame with any of the specified TPIDs is processed as a tagged frame; however, with IQ2 and IQ2-E interfaces, only the first four IEEE 802.1Q TPID values per port are supported. To configure the TPID values, include the tag-protocol-id statement:
-
tag-protocol-id [ tpids ];
You can include this statement at the following hierarchy levels:
All TPIDs you include in input and output VLAN maps must be among those you specify at the [edit interfaces interface-name gigether-options ethernet-switch-profile tag-protocol-id [ tpids ]] or [edit interfaces interface-name aggregated-ether-options ethernet-switch-profile tag-protocol-id [ tpids ]] hierarchy level.
| Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |