[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
Configuring E1 Physical Interface Properties
To configure E1-specific physical interface properties, include
the e1-options statement at the [edit interfaces interface-name] hierarchy level:
- [edit interfaces interface-name]
-
e1-options {
-
bert-error-rate rate;
-
bert-period seconds;
-
fcs (16 | 32);
-
framing (g704 | g704-no-crc4
| unframed);
-
idle-cycle-flag (flags | ones);
-
invert-data;
-
loopback (local | remote);
-
start-end-flag (filler
| shared);
-
timeslots time-slot-range;
- }
[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
