Configuring Aggregated Ethernet Link Speed

[Contents] [Prev] [Next] [Index] [Report an Error]

On aggregated Ethernet interfaces, you can set the required link speed for all interfaces included in the bundle. All interfaces that make up a bundle must be the same speed. If you include in the aggregated Ethernet interface an individual link that has a speed different from the speed you specify in the link-speed parameter, an error message will be logged. To set the required link speed, include the link-speed statement at the [edit interfaces interface-name aggregated-ether-options] hierarchy level:



[edit interfaces interface-name aggregated-ether-options]

link-speed speed ;

speed can be in bits per second either as a complete decimal number or as a decimal number followed by the abbreviation k (1000), m (1,000,000), or g (1,000,000,000).

Aggregated Ethernet interfaces on the M120 routing platform can have one of the following speed values:

100m—Links are 100 Mbps.

10g—Links are 10 Gbps.

1g—Links are 1 Gbps.

OC192—Links are OC192 or STM64c.

[Contents] [Prev] [Next] [Index] [Report an Error]