Configuring 10-Gigabit Ethernet Framing

[Contents] [Prev] [Next] [Index] [Report an Error]

The 10-Gigabit Ethernet IQ2 and IQ2-E PIC uses the interface type xe-fpc/pic/port. On this single-port PIC, the port number is always zero.

The xe-fpc/pic/port interface inherits all the configuration commands that are used for gigabit Ethernet (ge-fpc/pic/port) interfaces.

To configure LAN PHY or WAN PHY operating mode, include the framing statement with the lan-phy or wan-phy option at the [edit interfaces xe-fpc /pic/0 ] hierarchy level.



[edit interfaces xe-fpc/pic/0 framing]

framing (lan-phy | wan-phy);

To display interface information, use the operational mode command show interfaces xe-fpc/pic/port extensive.

Note: If you configure the WAN PHY mode on an aggregated Ethernet interface, you must set the aggregated Ethernet link speed to OC192.

[Contents] [Prev] [Next] [Index] [Report an Error]