[Contents] [Prev] [Next] [Index] [Report an Error]

demux-source

See the following sections:

demux-source (Underlying Interface)

Syntax

demux-source family;

Hierarchy Level

[edit interfaces interface-name unit logical-unit-number],
[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number],
[edit logical-systems logical-system-name routing-instances routing-instance-name interfaces interface-name unit logical-unit-number],

Release Information

Statement introduced in JUNOS Release 9.0.

Support for aggregated Ethernet added in JUNOS Release 9.4.

Description

Configure the logical demultiplexing (demux) source family type on the IP demux underlying interface.

Note: The IP demux interface feature currently supports only Fast Ethernet, Gigabit Ethernet, 10-Gigabit Ethernet, or aggregated Ethernet underlying interfaces.

Usage Guidelines

See Configuring an IP Demux Underlying Interface.

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.

demux-source (Demux Interface)

Syntax

demux-source {
source-prefix;
}

Hierarchy Level

[edit interfaces interface-name unit logical-unit-number family family],
[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number family family],
[edit logical-systems logical-system-name routing-instances routing-instance-name interfaces interface-name unit logical-unit-number family family]

Release Information

Statement introduced in JUNOS Release 9.0.

Support for aggregated Ethernet added in JUNOS Release 9.4.

Description

Configure one or more logical demultiplexing (demux) source prefixes. The prefixes are matched against the source address of packets that the underlying interface receives. When a match occurs, the packet is processed as if it was received on the demux interface.

Usage Guidelines

See Configuring IP Demux Prefixes.

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.

[Contents] [Prev] [Next] [Index] [Report an Error]

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.