control-signal



control-signal (assert | de-assert | normal);



[edit interfaces interface-name serial-options dce-options],
[edit interfaces interface-name serial-options dte-options]

Statement introduced before JUNOS Release 7.4.

For X.21 interfaces only, configure the to-DCE signal.

assert—The to-DCE signal must be asserted.
de-assert—The to-DCE signal must be deasserted.
normal—Normal request-to-send (RTS) signal handling, as defined by ITU-T Recommendation X.21.

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.