Configuring T1 Interfaces

This chapter includes an overview of T1 interfaces and configuration information as follows:

• T1 Interfaces Overview
• Configuring T1 Physical Interface Properties
• Configuring T1 BERT Properties
• Configuring the T1 Buildout
• Configuring T1 Byte Encoding
• Configuring T1 CRC Error Major Alarm Thresholds
• Configuring T1 CRC Error Minor Alarm Thresholds
• Configuring T1 Data Inversion
• Configuring the T1 Frame Checksum
• Configuring the T1 Remote Loopback Response
• Configuring T1 Framing
• Configuring T1 Line Encoding
• Configuring T1 Loopback Capability
• Configuring the T1 Idle Cycle Flag
• Configuring T1 Start and End Flags
• Configuring Fractional T1 Time Slots

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.