Configuring Protocol Family and Interface Address Properties

This chapter describes the configuration of the interface protocol and address properties:

• Protocol Family Configuration and Interface Address Statements
• Configuring the Protocol Family
• Configuring the Interface Address
• Configuring IPCP Options
• Configuring LLC2 Options
• Configuring an Unnumbered Interface
• Setting the Protocol MTU
• Disabling the Removal of Address and Control Bytes
• Disabling the Transmission of Redirect Messages on an Interface
• Configuring Default, Primary, and Preferred Addresses and Interfaces
• Applying Policers
• Applying a Filter to an Interface
• Configuring Unicast RPF
• Enabling Source Class and Destination Class Usage

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.