 | Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |
The M-series 320 routing platform supports an external synchronization interface that can be configured to synchronize the internal Stratum 3 clock to an external source, and then synchronize the chassis interface clock to the external source.
This feature can be configured for external primary and secondary interfaces that use Building Integrated Timing System (BITS) or SDH Equipment Timing Source (SETS) timing sources. When internal timing is set for SONET/SDH, Plesiochronous Digital Hierarchy (PDH), and digital hierarchy (DS1) interfaces on the Physical Interface Cards (PICs), the transmit clock of the interface is synchronized to BITS/SETS timing and traceable to timing within the network.
To configure external synchronization on the M-series 320 router, include the synchronization statement at the [edit chassis] hierarchy level.
For more information about the external synchronization interface, see the JUNOS System Basics Configuration Guide.
| Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |