[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
Channelized Interface Capabilities
You can configure each port of a channelized IQ or IQE PIC as
a single interface that uses the entire available bandwidth, or partition
each port into smaller data channels. In either case, you start with
a channelized interface (designated by a c in the interface
name, as in coc12). From the channelized interfaces, you
configure data channels. Following are the channelized interface names
and data-channel interface names associated with channelized IQ and
IQE PICs.
Channelized Interface Names
This section lists the channelized interface names.
-
coc48-fpc/pic/port—Channelized OC48 IQE interface.
Configure on a Channelized OC48 IQE PIC.
-
coc12-fpc/pic/port—Channelized OC12 interface.
Configure on a Channelized OC12 IQ or IQE PIC, or Channelized OC48
IQE PIC.
-
coc3-fpc/pic/port:channel—Channelized
OC3 interface. Configure on a Channelized OC3 IQ or IQE, Channelized
OC12 IQ or IQE, or Channelized OC48 IQE PIC.
-
coc1-fpc/pic/port:channel—Channelized
OC1 interface. Configure on a Channelized OC3 IQ or IQE, Channelized
OC12 IQ or IQE, or Channelized OC48 IQE PIC.
-
ct3-fpc/pic/port:channel—Channelized
T3 interface. Configure on a Channelized OC3 IQ or IQE, Channelized
OC12 IQ or IQE, Channelized OC48 IQE, or Channelized DS3 IQ or IQE
PIC.
-
cstm16-fpc/pic/port—Channelized STM16 interface.
Configure on a Channelized OC48 IQE PIC in SDH mode.
-
cstm4-fpc/pic/port—Channelized STM4 interface.
Configure on a Channelized OC12 IQ or IQE PIC in SDH mode.
-
cstm1-fpc/pic/port—Channelized STM1 interface.
Configure on a Channelized STM1 IQ or IQE PIC.
-
cau4-fpc/pic/port:channel—Channelized
AU-4 IQ interface. Configure on a Channelized STM1 IQ or IQE PIC,
Channelized OC48 IQE, or Channelized OC12 IQE PIC.
-
ct1-fpc/pic/port:channel—Channelized
T1 interface. Configure on a Channelized OC3 IQ or IQE, Channelized
OC12 IQ or IQE, Channelized T1 IQ, Channelized OC48 IQE, or Channelized
DS3 IQ or IQE PIC.
-
ce1-fpc/pic/port:channel—Channelized
E1 interface. Configure on a Channelized E1 IQ or a Channelized STM1
IQ or IQE PIC, Channelized OC48 IQE, or Channelized OC12/STM4 IQE
PIC.
Data-Channel Interface Names
This section lists the data-channel interface names.
-
e1-fpc/pic/port:channel—E1
channel. Configure on a Channelized E1 IQ or a Channelized STM1 IQ
or IQE, Channelized OC12/STM4 IQE PIC, or Channelized OC48 IQE PIC.
-
e3-fpc/pic/port:channel—E3
channel. Configure on Channelized OC3/STM1 IQE, or Channelized OC12/STM4
IQE, Channelized OC48 IQE, or Channelized/Clear channel DS3E3 IQE
or E3 IQ PICs.
-
ds-fpc/pic/port:channel—NxDS0 channel. Configure on a Channelized OC3 IQ or IQE,
Channelized OC12 IQ or IQE, Channelized OC48 IQE, Channelized STM1
IQ or IQE, Channelized DS3 IQ or IQE, Channelized T1 IQ, or Channelized
E1 IQ PIC.
-
so-fpc/pic/port:channel—SONET/SDH
channel. Configure one OC3 channel on a Channelized OC3 IQ or IQE,
four OC3 channels on a Channelized OC12 IQ or IQE, one OC12 channel
on a Channelized OC12 IQ or IQE, four OC12 channels on Channelized
OC48 IQE, or one STM1 channel on a Channelized STM1 IQ or IQE PIC.
-
t1-fpc/pic/port:channel—T1
channel. Configure on a Channelized T1 IQ, Channelized OC3 IQ or IQE,
Channelized OC12 IQ or IQE, Channelized OC48 IQE, or Channelized DS3
IQ or IQE PIC.
-
t3-fpc/pic/port:channel—T3
channel. Configure on a Channelized OC3 IQ or IQE, Channelized OC12
IQ or IQE, Channelized OC48 IQE, Clear Channel DS3E3 IQE, or Channelized
DS3 IQ or IQE PIC.
[Contents]
[Prev]
[Next]
[Index]
[Report an Error]