[Contents] [Prev] [Next] [Index] [Report an Error]

ATM2 IQ Physical and Logical Configuration Statement Hierarchies

To configure ATM2 IQ physical interface properties, include the atm-options and sonet-options statements at the [edit interfaces at-fpc/pic/port] hierarchy level:

ATM2 IQ Physical Configuration Hierarchy



[edit interfaces at-fpc/pic/port]

atm-options {

cell-bundle-size cells;

ilmi;



linear-red-profiles profile-name{

high-plp-max-threshold percent;

low-plp-max-threshold percent;

queue-depth cells high-plp-threshold percent low-plp-threshold percent;
}





mpls {



pop-all-labels {

required-depth number;
}


}



pic-type atm2;

plp-to-clp;



promiscuous-mode {

vpi vpi-identifier;
}





scheduler-maps map-name {



forwarding-class class-name {

epd-threshold cells plp1 cells;

linear-red-profile profile-name;

priority (high | low);

transmit-weight (cells number | percent number);
}



vc-cos-mode (alternate
| strict);
}





vpi vpi-identifier {



oam-liveness {
up-count;
down-count;
}



oam-period (disable
| seconds);



shaping {
(cbr rate | rtvbr peak rate sustained rate burst length | vbr peak rate sustained rate burst length);
}


}


}

sonet-options {



aps {

advertise-interval milliseconds;

authentication-key key;

force;

hold-time milliseconds;

lockout;

neighbor address;

paired-group group-name;

protect-circuit group-name;

request;

revert-time seconds;

working-circuit group-name;
}





bytes {
e1-quiet value;
f1 value;
f2 value;
s1 value;
z3 value;
z4 value;
}



loopback (local | remote);
(payload-scrambler | no-payload-scrambler);

rfc-2615;



trigger {



defect ignore {

hold-time up milliseconds down milliseconds;
}


}


(z0-increment |
no-z0-increment);
}

To configure ATM2 IQ logical interface properties, include the following statements:

ATM2 IQ Logical Configuration Hierarchy




allow-any-vci;

atm-scheduler-map (map-name | default);

cell-bundle-size cells;

epd-threshold cells;

multicast-vci vpi-identifier.vci-identifier;

oam-liveness {
up-count cells;
down-count cells;
}

oam-period (disable
| seconds);

plp-to-clp;

shaping {
(cbr rate | rtvbr peak rate sustained rate burst length | vbr peak rate sustained rate burst length);
}

transmit-weight number;

trunk-id number;

vci vpi-identifier.vci-identifier;

vpi vpi-identifier;
family inet address address {

multipoint-destination address;

epd-threshold cells;

inverse-arp;



oam-liveness {
up-count cells;
down-count cells;
}



oam-period (disable
| seconds);



shaping {
(cbr rate | rtvbr peak rate sustained rate burst length | vbr peak rate sustained rate burst length);
}



transmit-weight number;

vci vpi-identifier.vci-identifier;
}

You can include these statements at the following hierarchy levels:

[edit interfaces interface-name unit logical-unit-number]
[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number]

[Contents] [Prev] [Next] [Index] [Report an Error]