[Contents] [Prev] [Next] [Index] [Report an Error]

ATM1 Physical and Logical Configuration Statement Hierarchies

To configure ATM1 physical interface properties, include the atm-options, e3-options, t3-options, and sonet-options statements at the [edit interfaces at-fpc/pic/port] hierarchy level:

ATM1 Physical Configuration Hierarchy



[edit interfaces at-fpc/pic/port]

atm-options {

ilmi;



mpls {



pop-all-labels {

required-depth number;
}


}



pic-type atm1;



promiscuous-mode {

vpi vpi-identifier;
}





vpi vpi-identifier {
maximum-vcs maximum-vcs;
}


}

e3-options {

atm-encapsulation (direct | plcp);

buildout feet;

framing (g.751 | g.832);

loopback (local | remote);
(payload-scrambler | no-payload-scrambler);
}

encapsulation (atm-ccc-cell-relay |
atm-pvc | ethernet-over-atm);

sonet-options {



aps {

advertise-interval milliseconds;

authentication-key key;

force;

hold-time milliseconds;

lockout;

neighbor address;

paired-group group-name;

protect-circuit group-name;

request;

revert-time seconds;

working-circuit group-name;
}





bytes {
e1-quiet value;
f1 value;
f2 value;
s1 value;
z3 value ;
z4 value;
}



loopback (local | remote);
(payload-scrambler | no-payload-scrambler);

rfc-2615;



trigger {



defect ignore {

hold-time up milliseconds down milliseconds;
}


}


(z0-increment |
no-z0-increment);
}

t3-options {

atm-encapsulation (direct | plcp);

buildout feet;
(cbit-parity |
no-cbit-parity);

loopback (local | payload | remote);
(payload-scrambler | no-payload-scrambler);
}

To configure ATM1 logical interface properties, include the following statements:

ATM1 Logical Configuration Hierarchy




allow-any-vci;

multicast-vci vpi-identifier.vci-identifier;

oam-liveness {
up-count cells;
down-count cells;
}

oam-period (disable
| seconds);

shaping {
(cbr rate | vbr peak rate sustained rate burst length);

queue-length number;
}

vci vpi-identifier.vci-identifier;

vpi vpi-identifier;
family inet {


address address {



multipoint-destination address {

inverse-arp;



oam-liveness {
up-count cells;
down-count cells;
}



oam-period (disable
| seconds);



shaping {
(cbr rate | vbr peak rate sustained rate burst length);

queue-length number;
}



vci vpi-identifier.vci-identifier;
}


}


}

You can include these statements at the following hierarchy levels:

[edit interfaces interface-name unit logical-unit-number]
[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number]

[Contents] [Prev] [Next] [Index] [Report an Error]