See the following sections:
 |
Note: For information about the advertise-interval statement at the [edit interfaces interface-name unit unit-number family inet address address (vrrp-group | vrrp-inet6-group) group-number] or [edit logical-systems logical-system-name interfaces interface-name unit unit-number family (inet | inet6) address address (vrrp-group | vrrp-inet6-group) group-number] hierarchy level, see the JUNOS High Availability Configuration Guide. |
- advertise-interval milliseconds;
- [edit interfaces interface-name sonet-options aps]
Statement introduced before JUNOS Release 7.4.
Modify the Automatic Protection Switching (APS) interval at which the protect and working routers send packets to their neighbors to advertise that they are operational. A router considers its neighbor to be operational for a period, called the hold time, that is, by default, three times the advertisement interval.
milliseconds—Interval between advertisement packets.
See Configuring SONET/SDH Physical Interface Properties.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
- advertise-interval seconds;
- [edit interfaces interface-name unit logical-unit-number family llc2 redundancy-group group-number],
- [edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number family llc2 redundancy-group group-number]
Statement introduced in JUNOS Release 7.5.
For J-series Services Routers only. On Ethernet interfaces configured for DLSw Ethernet redundancy, configure the advertisement interval of DLSw neighbors on the network.
All routers in the redundancy group must use the same advertisement interval.
seconds—Interval between advertisement packets.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
JUNOS Services Interfaces Configuration Guide
 | Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |