security-name—Name used when performing access control.
 |
Note: The security name must match the configured security name at the [edit snmp v3 target-parameters target-parameters-name parameters] hierarchy level when you configure traps or informs. |
See the following sections:
- security-name security-name;
- [edit snmp v3 snmp-community community-index]
Statement introduced before JUNOS Release 7.4.
Associate the community string configured at the [edit snmp v3 snmp-community community-index] hierarchy level to a security name.
security-name—Name used when performing access control.
|
Note: The security name must match the configured security name at the [edit snmp v3 target-parameters target-parameters-name parameters] hierarchy level when you configure traps or informs. |
See Configuring the Security Names.
snmp—To view this statement in the configuration.
snmp-control—To add this statement to the configuration.
- security-name security-name;
- [edit snmp v3 vacm security-to-group security-model (usm | v1 | v2c)]
Statement introduced before JUNOS Release 7.4.
Associate a group or a community string with a configured security group.
security-name—Username configured at the [edit snmp v3 usm local-engine user username] hierarchy level. For SNMPv1 and SNMPv2c, the security name is the community string configured at the [edit snmp v3 snmp-community community-index] hierarchy level.
See Configuring the Security Name.
snmp—To view this statement in the configuration.
snmp-control—To add this statement to the configuration.
- security-name security-name;
- [edit snmp v3 target-parameters target-parameters-name parameters]
Statement introduced before JUNOS Release 7.4.
Configure the security name used when generating SNMP notifications.
security-name—Identifies the user that is used when generating the notification if the USM security model is used. Identifies the SNMP community used when generating the notification if the v1 or v2c security models are used.
|
Note: The access privileges for the group associated with this security name must allow this notification to be sent. If you are using the v1 or v2 security models, the security name at the [edit snmp v3 vacm security-to-group] hierarchy level must match the security name at the [edit snmp v3 snmp-community community-index] hierarchy level. |
See Configuring the Security Name.
snmp—To view this statement in the configuration.
snmp-control—To add this statement to the configuration.
 | Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |