 | Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |
See the following sections:
- security-model (usm | v1 | v2c);
- [edit snmp v3 vacm access group group-name default-context-prefix]
Statement introduced before JUNOS Release 7.4.
Configure a group’s security model used for access privileges.
usm—SNMPv3 security model.
v1—SNMPv1 security model.
v2c—SNMPv2c security model.
See Configuring the Security Model.
snmp—To view this statement in the configuration.
snmp-control—To add this statement to the configuration.
- security-model (usm | v1 | v2c);
- [edit snmp v3 vacm security-to-group]
Statement introduced before JUNOS Release 7.4.
Define a security model for a group.
usm—SNMPv3 security model.
v1—SNMPv1 security model.
v2c—SNMPv2c security model.
See Configuring the Security Model.
snmp—To view this statement in the configuration.
snmp-control—To add this statement to the configuration.
- security-model (usm | v1 | v2c);
- [edit snmp v3 target-parameters target-parameters-name parameters]
Statement introduced before JUNOS Release 7.4.
Configure a group’s security model used with sending notifications.
usm—SNMPv3 security model.
v1—SNMPv1 security model.
v2c—SNMPv2c security model.
See Configuring the Security Model.
snmp—To view this statement in the configuration.
snmp-control—To add this statement to the configuration.
| Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |