jnxL2tpSessionStatsLocalTID

jnxL2tpSessionStatsEntry 1

The local tunnel Identifier.

jnxL2tpSessionStatsLocalSID

jnxL2tpSessionStatsEntry 2

The local session Identifier.

jnxL2tpSessionStatsServiceInterface

jnxL2tpSessionStatsEntry 3

The name of the service interface on which this session is being hosted.

jnxL2tpSessionStatsTunnelGroup

jnxL2tpSessionStatsEntry 4

The name of the tunnel group to which this session belongs.

jnxL2tpSessionStatsRemoteSID

jnxL2tpSessionStatsEntry 5

The remote-end assigned session identifier for this session. This value remains zero from the time of starting the session until the time the remote end point responds.

jnxL2tpSessionStatsInterfaceUnit

jnxL2tpSessionStatsEntry 6

The interface unit number that corresponds to the logical service interface on which the session is being hosted.

jnxL2tpSessionStatsEncapType

jnxL2tpSessionStatsEntry 7

The tunnel encapsulation type.

jnxL2tpSessionStatsBundleID

jnxL2tpSessionStatsEntry 8

The ID of the bundle to which the session is linked. This field is valid only for tunnel encapsulation type multilink-ppp.

jnxL2tpSessionStatsStat

jnxL2tpSessionStatsEntry 9

One of the following status messages to show the state of the session at the time of querying:

• Established— The session is operational.
• Closed—The session has been closed.
• Destroyed—The session has been destroyed.
• Cleanup—The session has been cleaned up.
• lns_ic_accept_new—TThe new session has been accepted.
• lns_ic_idle—The session has been created but is in idle state.
• lns_ic_reject_new—A new session has been rejected.
• lns_ic_wait_connect—The session is waiting for the peer's incoming call connected (ICCN) message.

jnxL2tpSessionStatsUserName

jnxL2tpSessionStatsEntry 10

The peer session name on the interface. This is typically the login name of the remote user. This object contains a null string when the user name is unknown to the local tunnel peer.

jnxL2tpSessionStatsMode

jnxL2tpSessionStatsEntry 11

The configured mode value for this session.

jnxL2tpSessionStatsLocalAddrType

jnxL2tpSessionStatsEntry 12

The type of the local-end address of the tunnel that hosts the session.

jnxL2tpSessionStatsLocalAddress

jnxL2tpSessionStatsEntry 13

The local end address of the tunnel that hosts the session.

jnxL2tpSessionStatsLocalUdpPort

jnxL2tpSessionStatsEntry 14

The UDP port of the local end of the tunnel that hosts the session.

jnxL2tpSessionStatsRemoteAddrType

jnxL2tpSessionStatsEntry 15

The type of the remote end address of the tunnel that hosts the session.

jnxL2tpSessionStatsRemoteAddress

jnxL2tpSessionStatsEntry 16

The remote end address of the tunnel that hosts the session.

jnxL2tpSessionStatsRemoteUdpPort

jnxL2tpSessionStatsEntry 17

The UDP port of the remote-end of the tunnel that hosts the session.

jnxL2tpSessionStatsLocalHostName

jnxL2tpSessionStatsEntry 18

The local host name of the tunnel that hosts the session.

jnxL2tpSessionStatsRemoteHostName

jnxL2tpSessionStatsEntry 19

The host name as discovered during the tunnel establishment phase (via the Host Name AVP) of the L2TP peer.

jnxL2tpSessionAssignedIpAddrType

jnxL2tpSessionStatsEntry 20

The type of IP address of PPP client being tunneled as obtained from IPCP configuration while establishing the session.

jnxL2tpSessionAssignedIpAddress

jnxL2tpSessionStatsEntry 21

The IP address of the PPP client being tunneled as obtained from IPCP configuration while establishing the session.

jnxL2tpSessionLocalMRU

jnxL2tpSessionStatsEntry 22

The MRU for the local PPP Entity. This value is the MRU that the remote entity uses when sending packets to the session.

jnxL2tpSessionRemoteMRU

jnxL2tpSessionStatsEntry 23

The MRU for the remote PPP Entity. This value is the MRU that the local entity uses when sending packets to the remote PPP client.

jnxL2tpSessionStatsTxSpeed

jnxL2tpSessionStatsEntry 24

The last known transmit baud rate for the session.

jnxL2tpSessionStatsRxSpeed

jnxL2tpSessionStatsEntry 25

The last known receive baud rate for the session.

jnxL2tpSessionStatsCallBearerType

jnxL2tpSessionStatsEntry 26

The bearer type of this session.

jnxL2tpSessionStatsFramingType

jnxL2tpSessionStatsEntry 27

The framing type of the session.

jnxL2tpSessionStatsLCPRenegotiation

jnxL2tpSessionStatsEntry 28

The ON/OFF state of the LCP renegotiation for the session.

jnxL2tpSessionStatsAuthMethod

jnxL2tpSessionStatsEntry 29

The proxy authentication method employed by the LAC for the session.

nxL2tpSessionStatsNasIpAddrType

jnxL2tpSessionStatsEntry 30

The type of IP address of the RADIUS network address server to which the accounting records for this session are being sent.

jnxL2tpSessionStatsNasIpAddress

jnxL2tpSessionStatsEntry 31

The IP address of the RADIUS network address server to which the accounting records for the session are being sent.

jnxL2tpSessionStatsNasIpPort

jnxL2tpSessionStatsEntry 32

The port on which RADIUS network address server accounting messages are sent.

jnxL2tpSessionStatsFramedProtocol

jnxL2tpSessionStatsEntry 33

The frame protocol attribute obtained from RADIUS server for the session.

jnxL2tpSessionStatsFramedIpAddrType

jnxL2tpSessionStatsEntry 34

The address to be configured for the user, as provided by the RADIUS server in response to authentication request.

jnxL2tpSessionStatsFramedIpAddress

jnxL2tpSessionStatsEntry 35

The address to be configured for the user, as provided by the RADIUS server in response to the authentication request.

jnxL2tpSessionStatsCallingStationID

jnxL2tpSessionStatsEntry 36

The phone number from which call came in. The RADIUS NAS obtains the phone number that the call came from by using Automatic Number Identification (ANI) or similar technology. It is used only in Access-Request packets.

jnxL2tpSessionStatsCalledStationID

jnxL2tpSessionStatsEntry 37

The phone number to which the user called. The RADIUS NAS obtains the phone number that the user called by using Dialed Number Identification (DNIS) or similar technology. It is used only in Access-Request packets.

jnxL2tpSessionStatsAcctDelayTime

jnxL2tpSessionStatsEntry 38

Duration (in seconds) for which the RADIUS accounting client has been trying to send a record for. This value can be subtracted from the time of arrival on the server to find the approximate time of the event generating this Accounting-Request.

jnxL2tpSessionStatsAcctSessionID

jnxL2tpSessionStatsEntry 39

A unique Accounting ID to help match start and stop records in a log file.

jnxL2tpSessionStatsAcctMethod

jnxL2tpSessionStatsEntry 40

The accounting method employed for this session.

jnxL2tpSessionStatsAcctSessionTim

jnxL2tpSessionStatsEntry 41

Number of seconds for which the user has received service.

jnxL2tpSessionStatsAcctNasPortType

jnxL2tpSessionStatsEntry 42

The type of the physical port of the NAS that performs accounting for the user.

jnxL2tpSessionStatsAcctTnlClientEndPoint

jnxL2tpSessionStatsEntry 43

This object contains the remote tunnel Identifier of the tunnel that hosts the session.

jnxL2tpSessionStatsAcctTnlServerEndPoint

jnxL2tpSessionStatsEntry 44

The local tunnel Identifier of the tunnel that hosts the session.

jnxL2tpSessionStatsAcctTnlClientAuthID

jnxL2tpSessionStatsEntry 45

The host name of the tunnel that hosts the session as discovered during the tunnel establishment phase (via the Host Name AVP) of the L2TP peer.

jnxL2tpSessionStatsAcctTnlServerAuthID

jnxL2tpSessionStatsEntry 46

The local host name of the tunnel that hosts the session.

jnxL2tpSessionStatsUserProfileName

jnxL2tpSessionStatsEntry 47

The configured access profile name that is being used for the session.

jnxL2tpSessionStatsInterfaceID

jnxL2tpSessionStatsEntry 48

The interface identification (name) for the service interface that bears the session.

jnxL2tpSessionStatsCallSerialNumber

jnxL2tpSessionStatsEntry 49

The serial number assigned to the session.

jnxL2tpSessionStatsCreationTim

jnxL2tpSessionStatsEntry 50

Time when the session was created.

jnxL2tpSessionStatsUpTim

jnxL2tpSessionStatsEntry 51

The time elapsed since the session was established.

jnxL2tpSessionStatsIdleTime

jnxL2tpSessionStatsEntry 52

The time elapsed since the session had any data activity (transmission or reception).

jnxL2tpSessionStatsCollectionStart

jnxL2tpSessionStatsEntry 53

The time at which the statistics gathering started for the session.

jnxL2tpSessionStatsControlTxPkts

jnxL2tpSessionStatsEntry 54

The number of control packets transmitted to the session peer.

jnxL2tpSessionStatsControlTxBytes

jnxL2tpSessionStatsEntry 55

The number of control bytes that were transmitted to the session peer.

jnxL2tpSessionStatsControlRxPkts

jnxL2tpSessionStatsEntry 56

The number of control packets received on the session.

jnxL2tpSessionStatsControlRxBytes

jnxL2tpSessionStatsEntry 57

The number of control bytes received from the session peer.

jnxL2tpSessionStatsDataTxPkts

jnxL2tpSessionStatsEntry 58

The number of data packets transmitted to the remote session peer.

jnxL2tpSessionStatsDataTxBytes

jnxL2tpSessionStatsEntry 59

The number of data bytes that were transmitted to the session peer.

jnxL2tpSessionStatsDataRxPkts

jnxL2tpSessionStatsEntry 60

The number of data packets received on this session.

jnxL2tpSessionStatsDataRxBytes

jnxL2tpSessionStatsEntry 61

The number of data bytes that were received from the session peer.

jnxL2tpSessionStatsErrorTxPkt

jnxL2tpSessionStatsEntry 62

The number of error transmit packets on the session.

jnxL2tpSessionStatsErrorRxPkts

jnxL2tpSessionStatsEntry 63

The number of error receive packets on the session.