Port Group Table

[Contents] [Prev] [Next] [Index] [Report an Error]

Note: jnxVlanPortGroupTable has been deprecated and is replaced by jnxExVlanPortGroupTable. However, the JUNOS software will continue to support jnxVlanPortGroupTable until Release 9.5.

The jnxVlanPortGroupTable contains information about port groupings. Each jnxVlanPortGroupEntry contains the objects listed in Table 216.

Table 216: jnxVlanPortGroupTable

Object	Object ID	Description
jnxVlanPortGroupIndex	jnxVlanPortGroupEntry 1	Uniquely identifies a port group.
jnxVlanPort	jnxVlanPortGroupEntry 2	Specifies the port on the VLAN with which this port group is associated.
jnxVlanPortStatus	jnxVlanPortGroupEntry 3	Shows the status of association between the port and the VLAN. This object uses the following integer values: 1–autoActive: The port is part of the VLAN because the switch has automatically added the port. 2–allowed: The port has been configured to be part of the VLAN, and will be allowed to be part of the VLAN, if the port meets all other requirements. 3–allowedActive: The port has been configured to be part of the VLAN, and will be allowed to be part of the VLAN, if the port meets all other requirements. However, unlike in the case of allowed ports, this port has a device that is participating in the VLAN associated with the port. 4–allowedNotAvail: The port is active on some other VLAN, and is not available currently. This value applies to devices that do not allow a port to be part of more than one VLANs at the same time. 5–notAssociated: The port is part of a port group that is not associated with the VLAN.

Object

Object ID

Description

jnxVlanPortGroupIndex

jnxVlanPortGroupEntry 1

Uniquely identifies a port group.

jnxVlanPort

jnxVlanPortGroupEntry 2

Specifies the port on the VLAN with which this port group is associated.

jnxVlanPortStatus

jnxVlanPortGroupEntry 3

Shows the status of association between the port and the VLAN. This object uses the following integer values:

1–autoActive: The port is part of the VLAN because the switch has automatically added the port.
2–allowed: The port has been configured to be part of the VLAN, and will be allowed to be part of the VLAN, if the port meets all other requirements.
3–allowedActive: The port has been configured to be part of the VLAN, and will be allowed to be part of the VLAN, if the port meets all other requirements. However, unlike in the case of allowed ports, this port has a device that is participating in the VLAN associated with the port.
4–allowedNotAvail: The port is active on some other VLAN, and is not available currently. This value applies to devices that do not allow a port to be part of more than one VLANs at the same time.
5–notAssociated: The port is part of a port group that is not associated with the VLAN.

jnxExVlanPortGroupTable

jnxExVlanPortGroupTable replaces the deprecated jnxVlanPortGroupTable and contains the objects listed in Table 217.

Table 217: jnxExVlanPortGroupTable

Object	Object ID	Description
jnxExVlanPortGroupIndex	jnxExVlanPortGroupEntry 1	Uniquely identifies a port group.
jnxExVlanPort	jnxExVlanPortGroupEntry 2	Specifies the port on the VLAN with which this port group is associated.
jnxExVlanPortStatus	jnxExVlanPortGroupEntry 3	Shows the status of association between the port and the VLAN. This object uses the following integer values: 1–autoActive: The port is part of the VLAN because the switch has automatically added the port. 2–allowed: The port has been configured to be part of the VLAN, and will be allowed to be part of the VLAN, if the port meets all other requirements. 3–allowedActive: The port has been configured to be part of the VLAN, and will be allowed to be part of the VLAN, if the port meets all other requirements. However, unlike in the case of allowed ports, this port has a device that is participating in the VLAN associated with the port. 4–allowedNotAvail: The port is active on some other VLAN, and is not available currently. This value applies to devices that do not allow a port to be part of more than one VLANs at the same time. 5–notAssociated: The port is part of a port group that is not associated with the VLAN. Default value for this object is allowed.

Object

Object ID

Description

jnxExVlanPortGroupIndex

jnxExVlanPortGroupEntry 1

Uniquely identifies a port group.

jnxExVlanPort

jnxExVlanPortGroupEntry 2

Specifies the port on the VLAN with which this port group is associated.

jnxExVlanPortStatus

jnxExVlanPortGroupEntry 3

Shows the status of association between the port and the VLAN. This object uses the following integer values:

1–autoActive: The port is part of the VLAN because the switch has automatically added the port.
2–allowed: The port has been configured to be part of the VLAN, and will be allowed to be part of the VLAN, if the port meets all other requirements.
3–allowedActive: The port has been configured to be part of the VLAN, and will be allowed to be part of the VLAN, if the port meets all other requirements. However, unlike in the case of allowed ports, this port has a device that is participating in the VLAN associated with the port.
4–allowedNotAvail: The port is active on some other VLAN, and is not available currently. This value applies to devices that do not allow a port to be part of more than one VLANs at the same time.
5–notAssociated: The port is part of a port group that is not associated with the VLAN.

Default value for this object is allowed.

[Contents] [Prev] [Next] [Index] [Report an Error]