[Contents] [Prev] [Next] [Index] [Report an Error]

Full Mesh MVPN Configuration

In this example, PE-1 connects to VPN-A and VPN-B at site 1, PE-4 connects to VPN-A at site 4, and PE-2 connects to VPN-B at site 3, as shown in Figure 37. To configure a full mesh MVPN for VPN-A and VPN-B, perform the following steps:

Configure PE-1 (both VPN-A and VPN-B at site 1):



[edit]
routing-instances {


VPN-A {
instance-type vrf;
interface so-6/0/0.0;
interface so-6/0/1.0;


provider-tunnel {


pim-asm {
group-address 224.1.1.1;
}


}




protocols {
mvpn;
}


route-distinguisher 65535:0;
vrf-target target:1:1;

}




VPN-B {
instance-type vrf;
interface ge-0/3/0.0;


provider-tunnel {


pim-asm {
group-address 224.1.1.2;
}


}




protocols {
mvpn;
}


route-distinguisher 65535:1;
vrf-target target:1:2;
}

Configure PE-4 (VPN-A at site 4):



[edit]
routing-instances {


VPN-A {
instance-type vrf;
interface so-1/0/0.0; 


provider-tunnel {


pim-asm {
group-address 224.1.1.1;
}


}




protocols {
mvpn;
}


route-distinguisher 65535:4;
vrf-target target:1:1;

}

Configure PE-2 (VPN-B at site 3):



[edit]
routing-instances {


VPN-B {
instance-type vrf;
interface ge-1/3/0.0; 


provider-tunnel {


pim-asm {
group-address 224.1.1.2;
}


}




protocols {
mvpn;
}


route-distinguisher 65535:3;
vrf-target target:1:2;
}

[Contents] [Prev] [Next] [Index] [Report an Error]