[Contents] [Prev] [Next] [Index] [Report an Error]

Example: Configuring an SSM-Only Domain

Deploying an SSM-only domain is much simpler than deploying an ASM domain; it only requires a few configuration steps. Enable PIM sparse mode on all interfaces by adding the mode statement at the [edit protocols pim interface all] hierarchy level. When configuring all interfaces, exclude the fxp0.0 management interface by adding the disable statement for that interface. Then configure IGMPv3 on all host-facing interfaces by adding the version statement at the [edit protocols igmp interface interface-name] hierarchy level.

In the following example, the host-facing interface is fe-0/1/2:



[edit]
protocols {


pim {


interface all {
mode sparse;
version 2; 
}




interface fxp0.0 {
disable;
}


}




igmp {


interface fe-0/1/2 {
version 3;
}


}


}

[Contents] [Prev] [Next] [Index] [Report an Error]